• Motors
• Drives
  • AC Servo Drives
    • S200
    • S300
    • S400
    • S600
    • S700
    • CD Series 5
    • MMC Smart Drive
    • PC800/PCE800
    • Additional Products
      • CD Series 2
      • SC900/SCE900
      • OC900/OCE900
      • B8961/B8962
      • PS33 Series
      • PC3400
    • Discontinued Products
  • DC Servo Drives
  • Adjustable Speed Drives
  • Stepper Drives
  • OEM CD Products
  • Custom Drives
• Controls
• Linear Bearings and Guides
• Ball Screws and Lead Screws
• Linear Motion Systems
• Actuators
• True Planetary Gearheads
• Clutches and Brakes
• Precision Balls
• Product Sets
• Air Bearing Rotary
• High Precision Stages

SC900 / SCE900

The SC/SCE 900 is not recommended for new applications. For new applications Danaher Motion recommend using the S200, S300, S600, CD Series 5 or MMC Smart Drive products . 

The SC/SCE 900 drives utilize a single DSP to close the current, velocity, and position loops. All system and application parameters are set in software to ensure repeatability and eliminate drift. The SC/SCE900 Series is available in several power levels, all with integral power supplies and shunt regulators. The base SC/SCE900 unit includes several command interface features. A standard ±10V analog interface is available to command motor torque or velocity. Two standard stepper interfaces, step/direction and Step Up/Step Down, are also available to command motor position or velocity. The drive can  be used in electronic gear following mode by using the quadrature encoder input. Various option cards are available to increase the functionality of the base drive. The option card is required to set the base SC/SCE900 parameters, but can be removed once set-up is complete. All option cards have the capability to replace the base drive’s personality parameter non-volatile storage and provide removable personality parameter storage. The option cards also allow SC/SCE900 firmware upgrades, which eliminate the need to disassemble equipment or the drive when upgrading.